FAQ about Xion Lab Rust Converter
Can I apply the rust converter on an already painted surface?
Will the Xion Lab Rust Converter and Primer works in salt water?
Will your product adhere to a galvanized steel roof that is rusted?
Can I use a garden sprayer?
Your product dries to a red color and I am looking for a final color of black. Is it possible to add a dye your product to achieve this?
Would you recommend this product for these applications to prevent rusting?
If I scrape all loose rust and then apply two coats, will it extend the life of the pan?
If I choose to top coat with another product, how long can I wait before applying?
Will it be ok to pour concrete around the treated rebar?
Can I use your 2-1 rust converter on my new steel parts that are not rusty as a primer?
What is the recommended spray tip for an HPLV spray gun? What pressure setting is best?
After applying the rust converter, can metal elements be welded onto the formed layer without removing the layer?
What is the approximate quantity of rust converter needed to apply on an area of about 11,840 sq.ft, and how much will it cost?
How long does it take before full drying and/or coating by next application?
What kind of your product is suitable for industrial furnace applications?
If brushed or rolled can it be worked or are you supposed to avoid a lot of movement once down?
Would the 2 in 1 rust converter be usable on a steel hull boat. Will an epoxy primer and paint adhere to the 2 in 1?
What do I need to do to apply this product with a spray gun?
What is the life of opened & unopened can?
Can I use it on a roof vent that's aluminum and on galvanized steel?
What is the maximum permanent (operating) temperature of exposure allowed on the formed layer as a result of using your product?
After applying the base coat of the rust converter, how long can/should I wait to topcoat?
Is it OK to thin with water does that mean I can spray and not worry about any minor moisture in air line?
Is this a moisture cured product?
Is it more difficult to get smooth paint job?
Do you have experience with your rust converter in industrial furnaces?
What is the minimum temperature that your rust converter can be applied?
Can you apply this product over BONDO?
At a constant temperature of about 212 ° F, how many years will the formed layer last?
I live in an area with temperatures goes below zero. Do I need to be concerned that my converter was exposed to below freezing temperatures?
Is unused portion best poured off into full smaller containers?
Can I use Xion Lab Rust Converter & Primer on vehicle parts such as rear end, crossmembers, brackets and other small parts?
Can I spray a coat of XionLab 2 & 1 and spraying one coat of enamel?
How long has this product been on the market?
If need be, how is this product removed?
After letting the XionLab Rust Converter dry, a dull white residue appeared on the surface. Is it normal?